BARIX IPAM Evaluation Kit

- BARIX IPAM Evaluation Kit -

Carrier board with Barix IP Audio Module

properties

RJ-45 Ethernet port with Link and Activity LED
Standard USB1.1 socket
Two RS-232 interfaces (1x9pin D-sub connector, 1x on board)
Four configurable TTL-level I/Os (with 10K pull-up resistors)
Microphone input (coil, powered or passive capacitive)
Standard stereo Line In and 3Vpp stereo audio Out
Socket for Real Time Clock (Dallas DS1904)
Connector for Reset button
Runs off a single +8 to 40 Volt DC power source (on board switching power regulator for 5VDC)
12VDC regulator for powering external serial devices
Small form factor (101.5mm x 84mm x 17mm)
incl. 1 IP Audio Module

description

The Barix IPAM Evaluation Kit allows manufacturers to test the capabilities of the Barix IP Audio Module prior to the design of a own custom board. Providing commonly used interfaces it can be directly used as an OEM product solution in many cases. Application fields:
Interfacing of digital or analog audio signals to TCP/IP (Intranet and Internet), intercom & paging systems, broadcast equipment, audio monitoring, audio distribution, updatable standalone player, alarm systems, audio recording (live audio transmission)