MOXA ioLogik E2214

SPHINX in Europe
DE
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Product groups > I/O Modules > MOXA ioLogik E2214

MOXA ioLogik E2214

Active Ethernet I/O with 6 digital inputs and 6 relay outputs

MOXA ioLogik E2214
2800_12202.png
2800_8579.png
2800_12203.jpg
  • PropertiesProperties
  • DescriptionDescription
  • Further InformationFurther Information
  • PDFPDF
  • Front-end intelligence that supports 24 Click&Go™ rules
  • Active Messaging with real-time stamp, including SMS, SNMP Trap with I/O status, TCP, and email
  • Supports SNMPv1/v2c/v3 protocol
  • I/O peer-to-peer function
  • Built-in web console
  • PC utility: Auto detection of installed modules
  • Windows/WinCE VB/VC.NET and Linux C APIs
Moxa’s ioLogik E2214 is a new type of active micro controller that can be used as an RTU (Remote Terminal Unit). Active Ethernet micro controllers are a kind of PC-based data acquisition and control device that use proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa’s Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Active Ethernet micro controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
ProdGrafik

ioLogik E2214 Specifications



Inputs and Outputs

Digital Inputs
6 channels

Relay Outputs
6 channels

Isolation
3k VDC or 2k Vrms


Digital Input

Sensor Type
Wet Contact (NPN or PNP) and Dry Contact

I/O Mode
DI or Event Counter

Dry Contact
  • On: short to GND
  • Off: open

Wet Contact (DI to GND)
  • On: 0 to 3 VDC
  • Off: 10 to 30 VDC

Common Type
3 points per COM

Counter Frequency
900 Hz

Digital Filtering Time Interval
Software Configurable


Relay Output

Type
Form A (N.O.) power relay

Contact Current Rating
  • Inductive Load: 2 A @ 30 VDC, 250 VAC, 110 VAC
  • Resistive Load: 5 A @ 30 VDC, 250 VAC, 110 VAC

Minimum permitted load
1 A @ 5 VDC

Initial Insulation Resistance
1000 M ohms (min.) @ 500 VDC

Mechanical endurance
1,000,000 operationsElectrical endurance: 100,000 operations @ 5 A resistive load

Contact Resistance
100 m ohms (max.)

Pulse Output
0.3 Hz at rated load


Power Requirements

Power Consumption
170 mA @ 24 VDC


MTBF (mean time between failures)

Time
307,239 hrs

Database
Telcordia (Bellcore)



Common Specifications


LAN

Ethernet
1 10/100 Mbps RJ45 port

Protection
1.5 kV magnetic isolation

Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP


Serial Communication

Interface
RS-485-2w: Data+, Data-, GND (3-contact terminal block)

Serial
Line Protection 15 kV ESD for all signals


Serial Communication Parameters

Parity
None

Data Bits
8

Stop Bits
1

Flow Control
None

Baudrate
1200 to 115200 bps

Protocol
Modbus/RTU


Power Requirements

Power Input
24 VDC nominal, 12 to 36 VDC


Physical Characteristics

Wiring
I/O cable max. 14 AWG

Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)

Weight
under 250 g

Mounting
DIN rail or wall


Environmental Limits

Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.


Standards and Certifications

Safety
UL 508

EMI
EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;

FCC
Part 15, Subpart B, Class A

EMS
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
EN 61000-4-8, EN 61000-4-11, EN 61000-6-2

Shock
IEC 60068-2-27

Freefall
IEC 60068-2-32

Vibration
IEC 60068-2-6

Green Product
RoHS, CRoHS, WEEE



Ordering Information

Available Modules
ioLogik E2214 Ethernet Micro RTU Controller with 6 digital inputs and 6 relay outputs
ioLogik E2214-T Ethernet Micro RTU Controller with 6 digital inputs and 6 relay outputs,
-40 to 85°C operating temperature




Customers who viewed this item also viewed
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.