MOXA IMC-P101 Series
IEEE 802.3af PoE Ethernet-to-fiber media converters
- 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
- IEEE 802.3af compliant PoE PSE equipment
- Power failure alarm by relay output
- Store-and-forward mode and pass through mode
- -40 to 75°C operating temperature range (T models)
- Redundant dual DC power inputs
IMC-P101 series Ethernet-to-fiber media converters provide Ethernet media conversion from 10/100BaseT(X) to 100BaseFX (with SC or ST connectors). These converters are classified as power source equipment (PSE), and when used in this way provide up to 15.4 watts to IEEE 802.3af compliant powered devices (PDs), eliminating the need for additional wiring. The IMC-P101 converters support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, and MDI/ MDI-X auto-sensing, providing a complete solution for your industrial Ethernet network.
Technology
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X), 100BaseFX
IEEE 802.3af for Power-over-Ethernet
Interface
RJ45 Ports
10/100BaseT(X)
Fiber Ports
100BaseFX (SC/ST connectors)
LED Indicators
PWR1, PWR2, Fiber Link, 10/100M (TP port), PSE Indicator
DIP Switches
DIP No. | Function | ON | OFF |
1 | Auto Negotiation | Enable* | Disable |
2 | Force TP Speed | 100 Mbps* | 10 Mbps |
3 | Force TP Duplex | Full Duplex* | Half Duplex |
4 | Link Fault Pass Through | Enable* | Disable |
5 | Operating Mode | Store-and-Forward* | Pass Through |
6 | PSE | Disable | Enable* |
7 | P.R.R. (PD Remote Reset) | Enable | Disable* |
* Default DIP switch setting.
Alarm Contact
One relay output with current carrying capacity of 1 A @ 24 VDC
Optical Fiber
100BaseFX | ||
Multi-mode | Single-mode | |
Wavelength | 1300 nm | 1310 nm |
Max. TX | -10 dBm | 0 dBm |
Min. TX | -20 sBm | -5 dBm |
RX Sensitivity | -32 dBm | -34 dBm |
Link Budget | 12 dB | 29 dB |
Typical Distance | 5 km (a) 4 km (b) | 40 km (c) |
Saturation | -6 dBm | -3 dBm |
(a) 50/125 ìm, 800 MHz*km fiber optic cable
(b) 62.5/125 ìm 500 MHz*km fiber optic cable
(c) 9/125 ìm dingle-mode fiber optic cable
Physical Characteristics
Housing
Metal
Dimensions
144.45 x 122.3 x 51.65 mm (5.69 x 4.81 x 2.03 in)
Weight
Product only: 525 g
Packaged: 710 g
Installation
DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Power Requirements
Input Voltage
48 VDC (46 to 57 VDC), redundant inputs
Power Consumption
430 mA @ 48 VDC (max.)
Connection
Removable terminal block
Overload Current Protection
1.6 A (protects against two signals shorted together)
Reverse Polarity Protection
Protects against V+/V- reversal
Standards and Certifications
Safety
UL 508
EMC
CE, FCC
EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS
IEC 61000-4-2 (ESD) Level 4,
IEC 61000-4-3 (RS) Level 3,
IEC 61000-4-4 (EFT) Level 4,
IEC 61000-4-5 (Surge) Level 3,
IEC 61000-4-6 (CS) Level 3,
IEC 61000-4-8 (PFMF) Level 1,
IEC 61000-4-11
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Green Product
RoHS, CRoHS, WEEE
MTBF (mean time between failures)
Time
435,210 hrs
Database
Telcordia (Bellcore), GB
Ordering Information
Available Modules | |
IMC-P101-M-SC | PoE industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode port with SC connector, 0 to 60°C operating temperature |
IMC-P101-M-SC-T | PoE industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode port with SC connector, -40 to 75°C operating temperature |
IMC-P101-M-ST | PoE industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode port with ST connector, 0 to 60°C operating temperature |
IMC-P101-M-ST-T | PoE industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode port with ST connector, -40 to 75°C operating temperature |
IMC-P101-S-SC | PoE industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode port with SC connector, 0 to 60°C operating temperature |
IMC-P101-S-SC-T | PoE industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode port with SC connector, -40 to 75°C operating temperature |
IMC-P101-S-ST | PoE industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode port with ST connector, 0 to 60°C operating temperature |
IMC-P101-S-ST-T | PoE industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode port with ST connector, -40 to 75°C operating temperature |
Customers who viewed this item also viewed