MOXA CP-118E-A-I / CP-138E-A-I
8-port 3-in-1, RS-422/485 PCI Express board with 4 kV surge protection and 2 kV electrical isolation
- PCI Express x1 compliant
- Serial communication speed up to 921.6 Kbps
- 128-byte FIFO and on-chip S/W flow control
- Variety of connection cables and boxes available for RS-232/422/485
- Drivers provided for the latest versions of Windows, Linux, and Unix
- Easy maintenance with on-board LED display and management software
- 15 kV ESD, 4 kV surge, and 2 kV electrical isolation onboard
The CP-118E-A-I and CP-138E-A-I are smart PCI Express multiport serial boards designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-118E-A-I and CP-138E-A-I are compatible with all popular operating systems, and each of their 8 serial ports supports data rates of up to 921.6 kbps, and provide full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-118E-A-I and CP-138E-A-I work with PCI Express x1, allowing the boards to be installed in any PCI Express slot.
Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)
Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.
Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)
Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.
- Hardware
- 16C550C compatible
- PCI Express x1
- 8
- CP-118E-A-I: RS-232/422/485
- CP-138E-A-I: RS-422/485
- 4
- 15 KV on the board
- 4 kV
- 2 kV
- 50 bps to 921.6 Kbps
- 5, 6, 7, 8
- 1, 1.5, 2
- None, Even, Odd, Space, Mark
- RTS/CTS, XON/XOFF
- TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
- TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
- Data+(B), Data-(A), GND
- Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)
- QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)
- Linux 2.4.x, 2.6.x, 3.x
- Please refer to Moxa’s website for the latest driver support information.
- 109.5 x 130 mm (4.31 x 5.11 in)
- 0 to 55°C (32 to 131°F)
- -20 to 85°C (-4 to 185°F)
- 5 to 95% (non-condensing)
- Up to 2000 m
- Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
- CE, FCC
- EN 55022, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class B
- EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 (DIPS)
- RoHS, CRoHS, WEEE
- CP-118E-A-I: 152,124 hrs
- CP-138E-A-I: 221,331 hrs
- Telcordia (Bellcore), GB
- CP-118E-A-I: 2,356 mA @ 3.3 V CP-138E-A-I: 2,356 mA @ 3.3 V
Comm. Controller
Bus
Serial Interface
Number of Ports
Serial Standards
Max. No. of Boards per PC
Serial Line Protection
ESD Protection
Surge Protection
Electrical Isolation
Performance
Baudrate
Serial Communication Parameters
Data Bits
Stop Bits
Parity
Flow Control
Serial Signals
RS-232
RS-422
RS-485-4w
RS-485-2w
Operating Systems
Windows Real COM Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
Note
Physical Characteristics
Dimensions
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Altitude
Note
Standards and Certifications
EMC
EMI
EMS
Green Product
MTBF (mean time between failures)
Time
Database
Power Requirements
Power Consumption
Ordering Information
CP-118E-A-I | 8-port RS-232/422/485 PCI Express x1 serial board w/ surge protection and electrical isolation |
CP-138E-A-I | 8-port RS-422/485 PCI Express Smart x1 serial board w/ surge protection and electrical isolation |
Customers who viewed this item also viewed