TERZ NITE-RS FO
Unmanaged Industrial Ethernet Switches FO SC Duplex
- Flexible use with 24 VAC/VDC
- 1-3SC duplex fiber ports
- Minimal installation width 25 mm
- Multimode and Singlemode
- Temperature range -40 to +70°C
- Stable mounting on 35 mm DIN rail
- Polarity protection
- PROFINET suitable
The NITE-RS fiber optic switches operate highly efficient in industrial environments with up to 3 SC duplex ports. Through the various combinations of fiber optic cable and copper port, all applications can be optimally planned. Through the use of multimode and singlemode transceivers, data can be transmitted via fiber optic cable 2 km and 10 km far electromagnetically decoupled.
General
- Switch:
IEEE802.3 Store and Forward; non-blocking wire speed
Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes
Frame size:
1,522 Bytes
MAC table size:
2,000 addresses
Quality of Service:
Yes – 2 priority queues
Energy Efficient Ethernet:
No
Flow Control:
No
PROFINET suitable:
Yes
Port count (RJ45) | 6+1 | 4+2 | 2+3 |
MTBF (SN 29500, Mio. h) v | tbd | tbd | tbd |
Frame Forwarding (Art.-No.) | xxxxx0 | xxxxx1 |
LLDP, PTCP Delay 01:80:C2:00:00:0E | Forwarding | Blocking |
RSTP BPDU 01:80:C2:00:00:00 | Forwarding | Forwarding |
Power supply / electronics
- Nominal voltage:
Vin 24 VAC / 24 VDC
Permitted voltage range:
12 to 28 VAC / 12 to 36 VDC
Connection type:
3-pole pluggable, screw connector (+ - FE)
Wire cross-section:
0.08 to 2.5 mm (AWG 28 to 13)
Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)
Inrush current limiter:
Yes
Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC / VDC
Polarity protection:
Yes
PCB Conformal Coating:
No
Protection category:
III
Isolation:
0.75 kVDC; Vin ↔ Ethernet Ports | Vin ↔ housing
Port count (RJ45+SC-D) | 6+1 | 4+2 | 2+3 |
Power consumption (W) Idle | full load | 2.2 | 2.5 | 3.1 | 3.5 | 4 | 4.4 |
Input current (mA) Idle | full load | 90 | 105 | 130 | 145 | 165 | 185 |
Inrush current (A) | 16 | 16 | 16 |
Mechanical properties
- Housing material:
Anodised aluminium, stainless steel
Mounting:
35 mm DIN rail
IP Protection class (operation):
IP30
Port count (RJ45+SC-D) | 6+1 | 4+2 | 2+3 |
Width (mm) | 25 | 25 | 25 |
Height (mm) | 145 | 145 | 145 |
Depth (mm) | 77.4 | 77.4 | 77.4 |
Weight (g) | 320 | 320 | 320 |
Status and diagnostic indicators
- LED:
Power | Link/Activity per Port
Ethernet Interfaces
- IEEE Standards:
802.3 10BaseT, 802.3u 100BaseT(X), 100BASE-FX
Isolation:
0.75 kVDC; Ethernet Port ↔ housing | Port ↔ Port
Connection type:
RJ45
Port Count | Speed:
2,4,6 Ports | 10/100 Mbit/s
Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)
Connection type:
SC-Duplex multimode, SC-Duplex singlemode
Port Count | Speed| WL:
1,2,3 Ports | 100 Mbit/s | 1310 nm
Cable length MM | SM:
2 km (62.5/125 μm) | 10 km (9/125 μm)
Transmission power MM | SM (dBm):
-15 bis -3 | -15 bis -6
Sensitivity MM | SM (dBm):
-23 | -32
EMC and environmental specifications
- Operating temperature:
-40°C to +70°C
Storage temperature:
-40°C to +85°C
Relative humidity (operation):
0%-95% (not condensing)
Relative humidity (storage):
0%-95% (not condensing)
Atmospheric pressure (operation):
2,000 m (795 hPa)
EMC immunity:
DIN EN - 50121-3-2, 61000-6-2, 55024
EMC radiated emission:
DIN EN - 50121-3-2, 61000-6-4, 55032
Mechanical stability:
DIN EN 61373
Approvals and certifications
- CE, DIN EN 60950-1
ORDERING INFORMATION
Available Modules | ||
Article | Art.-No. | Specification (RJ45+SC-D) |
NITE-RS61-11000 | 21150100 | 6+1 MM LLDP Forward |
NITE-RS42-11000 | 21130200 | 4+2 MM LLDP Forward |
NITE-RS23-11000 | 21110300 | 2+3 MM LLDP Forward |
NITE-RS61-11010 | 21150110 | 6+1 SM LLDP Forward |
NITE-RS42-11010 | 21130210 | 4+2 SM LLDP Forward |
NITE-RS23-11010 | 21110310 | 2+3 SM LLDP Forward |
NITE-RS61-11001 | 21150101 | 6+1 MM LLDP Block |
NITE-RS42-11001 | 21130201 | 4+2 MM LLDP Block |
NITE-RS23-11001 | 21110301 | 2+3 MM LLDP Block |
NITE-RS61-11011 | 21150111 | 6+1 SM LLDP Block |
NITE-RS42-11011 | 21130211 | 4+2 SM LLDP Block |
NITE-RS23-11011 | 21110311 | 2+3 SM LLDP Block |
Customers who viewed this item also viewed