NetModule NB1600 UMTS/3G Router
Product is End of Life : 2017-10-31
NetBox Wireless Router
- Mobile 2G / 3G
- 2 Ethernet ports
- 2 digital inputs & outputs
- USB & RS-232
- Redundant power supply
- DIN rail mounting
The NB1600 NetBox Wireless Router is the preferred communication module for remote management, telemetry, condition monitoring and CCTV. NetModule’s Technical Support team is dedicated to helping you with anything related to NetBox products, including technical specifications, hardware and software installation, system diagnosis, and RMA service.
The NetModule NB1600 is a powerful and programmable industrial mobile broadband router for remote management, telemetry, condition monitoring, CCTV, ATMs, vending machines and other M2M applications.
For mobile internet access a GSM/UMTS or a GSM/UMTS/LTE modem is embedded. The best available service is selected automatically.
As a special highlight NB1600 offers two Ethernet ports that are highly configurable. Used as LAN ports they form a two port switch or have separated, routed IP networks. Configured as WAN port, an external modem or land line can be attached in order to add redundancy.
The RS-232 serial interface can act as serial device server or system console. Legacy equipment that does not have any Ethernet or USB port can be hooked up this way. Furthermore, the serial line can be assigned to the SDK and be controlled from there.
The NB1600 has two isolated binary inputs and two relay outputs for direct connection of sensors and actuators. The logic for the inputs/outputs is implemented by the user in the SDK environment on the router.
The USB port enables configuration and firmware update from memory stick. You may also configure it as a device server. Please ask for support of your special USB device.
The router firmware supports common VPN technologies such as IPsec and OpenVPN. Both, server and client mode is possible. Simple handling of a Public key infrastructure makes is easy to connect two NB1600 trough a VPN tunnel.
Further services include DHCP server, DNS proxy server, DDNS agent, SNMP agent, telnet server, SSH server, web server, e-mail client and SMS client. The device is administrated via an easy to use web GUI or the command line interface. Over the air software update is both easy and fail-safe. Note: The NetModule NB1600 is easy to install in the NetModule Cloud Router Software:
Further InformationMobile / Cellular
Multimode UMTS and GSM module Digital I/O
UMTS/3G: B5(850), B8(900), B2(1900), B1(2100)
GSM/2G: B5(850), B9(900), B3(1800), B2(1900)
Data rates: max. 14.4 Mbps downlink / 5.76 Mbps uplink
Antenna connector: SMA female
2 digital inputs, level 0 (not set): 0-4.0 VDC level 1 (set): 7.2-40 VDC Ethernet
2 digital outputs, 0-60 VDC/1A, maximum switching capacity: 60 W
Connector: 8 pins of 15-pin terminal block
2 Ethernet ports, 10/100 Mbps, Auto MDX, bridged or routed, RJ45 USB
USB Host interface, type A Serial
Protocol: 3-wire RS232 Power
Connector type: 3 pins of 15-pin terminal block
Redundant power supply inputs Dimensions
Input voltage: 12V DC to 48V DC (-15% / +20%)
Max. power consumption: 5W
Connector type: 2+2 pins of 15-pin terminal block
124.2mm x 45mm x 110mm Environment
Temperature range: -25 °C to +70 °C Safety Standards EMC Standards
Ingress Protection Rating: IP40; MTBF: 226´000h
EN301489-1 V1.7.1, EN301489-7 V1.3.1 (Emission) Type Approvals
EN61000-6-2:2005, EN50121-3-2:2006 and EN50121-4:2006 (Immunity)
CE according to directive 1995/5/EC (R&TTE) Order numbers:
FCC according to 47 CFR, Part 15
PDF NetModule NB1600 (304.0 kB) NetModule NB1600 UMTS/3G Router Datasheet (DE) (286.0 kB)