MOXA ioPAC 8500
Product is End of Life : 2020-12-22
Modular RTU Controller
- Dedicated ARM-based CPUs for main system and each I/O module
- Supports millisecond timestamp for digital input and analog input
- Supports 40 kHz sampling and pre-recording for analog input
- Supports C/C++ programming languages
- Compliant with EN 50121-3-2, EN 50121-4, and EN 50155
- Robust and compact design for harsh environments
- Modular I/O for versatility, flexibility, and scalability
The RTUs provide extremely accurate data, giving engineers the information they need to identify anomalous conditions, before failures occur. The ioPAC 8500 RTUs are also designed to work reliably in harsh environments, and modules can be easily replaced to shorten system downtime.
Precise Data Acquisition
Moxa’s ioPAC 8500 RTUs offer kHz-level analog input sampling rate, giving engineers the analog data precision they need to correctly analyze events. In addition, the analog input pre-recording function allows the ioPAC 8500 RTUs to continuously record analog input data before an event trigger point for improved data completeness.
Sustainable System Reliability
The ioPAC 8500 RTU controllers are compliant with EN 50155, EN50121-3-2 and EN 50121-4 railway standards, which require products to withstand high levels of vibration, and provide surge and ESD protection for the power and communication ports. They also support a wide operating temperature range of -40 to 75°C.
Easy Data Acquisition
Moxa’s ioPAC 8500 RTU controllers come with Moxa’s patented Active OPC server and DA-Center software. Active OPC server adds a non-polling architecture to the standard OPC protocol, giving users the advantage of push-based communication from Moxa’s controllers to the SCADA systems. DA-Center, on the other hand, provides a standard OPC interface that interacts with Moxa Active OPC Server for real-time data collection.
Easy to Deploy
Moxa’s ioPAC 8500 modular RTU controllers support a versatile collection of I/O modules. The compact size and modular design make this ioPAC 8500 ideal for cabinets with limited space, and all of the I/O modules are hot-swappable to allow users to replace the modules without shutting down the system.
Precise Data Acquisition
Moxa’s ioPAC 8500 RTUs offer kHz-level analog input sampling rate, giving engineers the analog data precision they need to correctly analyze events. In addition, the analog input pre-recording function allows the ioPAC 8500 RTUs to continuously record analog input data before an event trigger point for improved data completeness.
Sustainable System Reliability
The ioPAC 8500 RTU controllers are compliant with EN 50155, EN50121-3-2 and EN 50121-4 railway standards, which require products to withstand high levels of vibration, and provide surge and ESD protection for the power and communication ports. They also support a wide operating temperature range of -40 to 75°C.
Easy Data Acquisition
Moxa’s ioPAC 8500 RTU controllers come with Moxa’s patented Active OPC server and DA-Center software. Active OPC server adds a non-polling architecture to the standard OPC protocol, giving users the advantage of push-based communication from Moxa’s controllers to the SCADA systems. DA-Center, on the other hand, provides a standard OPC interface that interacts with Moxa Active OPC Server for real-time data collection.
Easy to Deploy
Moxa’s ioPAC 8500 modular RTU controllers support a versatile collection of I/O modules. The compact size and modular design make this ioPAC 8500 ideal for cabinets with limited space, and all of the I/O modules are hot-swappable to allow users to replace the modules without shutting down the system.
- Computer
- ARM9 based CPU, 32-bit/192 MHz
- ARM Cortex M4 based CPU, 32-bit/80MHz
- Linux
- Real-time clock with battery backup
- SDRAM: 64 MB
- Flash: 32 MB
- SRAM: 256 KB (battery backup lasts for 1 week)
- microSD™ Slot: Up to 32 GB (SD 2.0 compatible)
- For units operating in extreme temperatures, industrial grade, wide-temperature microSD cards are required.
- Up to 200 Mbps for all slots
- 2 x 10/100 Mbps, 2 MACs (IPs), RJ45 or M12
- 1.5 kV magnetic isolation
- 2 RS-232/422/485 ports, software selectable (DB9 male)
- 1 RS-232 debug port (4-pin connector)
- 8 kV ESD for all signals
- None, Even, Odd
- 7, 8
- 1, 2
- RTS/CTS, XON/XOFF
- 300 bps to 921.6 Kbps
- TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND, RI
- Tx+, Tx-, Rx+, Rx-, GND
- Tx+, Tx-, Rx+, Rx-, GND
- Data+, Data-, GND
- C/C++
- Modbus/TCP, Modbus/RTU Master
- 24 VDC nominal, 9 to 48 VDC
- Compliant with EN 50155 at 24 VDC
- 5 A @ 3.3 VDC (max.)
- 3.65 W @ 24 VDC
- Aluminum
- 2-slot version: 114.7 x 135 x 100 mm (4.52 x 5.31 x 3.94 in)
- 5-slot version: 190.9 x 135 x 100 mm (7.52 x 5.31 x 3.94 in)
- 9-slot version: 292.5 x 135 x 100 mm (11.52 x 5.31 x 3.94 in)
- 2-slot version: 1300 g
- 5-slot version: 2000 g
- 9-slot version: 2575 g
- DIN rail mounting (standard), wall mounting (optional)
- Spring-type terminal block
- -40 to 75°C (-40 to 176°F)
- -40 to 85°C (-40 to 185°F)
- 5 to 95% (non-condensing)
- Up to 2000 m
- UL 508
- EN 55022, EN 61000-3-2; EN 61000-3-3; FCC Part 15 Subpart B Class A
- EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11
- IEC 60068-2-27
- IEC 60068-2-32
- IEC 60068-2-6
- EN 50155, EN 50121-3-2, EN 50121-4
- 859,979 hrs
- Telcordia (Bellcore)
Main CPU
Ethernet Interface
LAN
Serial Communication
Interface
Serial Communication Parameters
Parity
Serial Signals
RS-232
Software Characteristics
Automation Languages
Power Requirements
Power Input
Physical Characteristics
Housing
Environmental Limits
Operating Temperature
Standards and Certifications
Safety
MTBF (mean time between failure)
Time
Ordering Information
Available Modules | |
ioPAC 8500-2-RJ45-IEC-T | Modular RTU controller with RJ45 connectors, 2 I/O slots, IEC 61131-3, -40 to 75°C operating temperature |
ioPAC 8500-2-M12-IEC-T | Modular RTU controller with M12 connectors, 2 I/O slots, IEC 61131-3, -40 to 75°C operating temperature |
ioPAC 8500-5-RJ45-IEC-T | Modular RTU controller with M12 connectors, 5 I/O slots, IEC 61131-3, -40 to 75°C operating temperature |
ioPAC 8500-5-M12-IEC-T | Modular RTU controller with M12 connectors, 5 I/O slots, IEC 61131-3, -40 to 75°C operating temperature |
ioPAC 8500-9-RJ45-IEC-T | Modular RTU controller with RJ45 connectors, 9 I/O slots, IEC 61131-3, -40 to 75°C operating temperature |
ioPAC 8500-9-M12-IEC-T | Modular RTU controller with M12 connectors, 9 I/O slots, IEC 61131-, -40 to 75°C operating temperature |
Customers who viewed this item also viewed