MOXA ioLogik E1261 W-T
Product is End of Life : 2020-12-22
Ethernet remote I/O for wind power applications
- User-definable Modbus/TCP Slave addressing
- Active communications with MX-AOPC UA Server
- Easy mass deployment and configuration with ioSearch utility
- Friendly configuration via web browser
- Simplify I/O management with MXIO library on either Windows or Linux platform
- Wide operating temperature range: -40 to 75°C (-40 to 167°F)
Moxa’s ioLogik E1261W-T is designed for Ethernet-based remote condition monitoring systems. With 3 RTD, 5 AI, and 12 DIO channels, the ioLogik E1261W-T’s I/O combination is ideal for monitoring wind turbines and environmental conditions. Unlike other remote I/O products, which are passive and must poll for data, the ioLogik E1261W-T supports active communication with Moxa’s patented Active OPC Server to seamlessly connect with SCADA systems in real time.This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
LAN
Serial
Inputs and Outputs
Digital Input
Digital Output
Analog Input
RTD
Power Requirements
Physical Characteristics
Environmental Limits
Standards and Certifications
MTBF (mean time between failures)
Ordering Information
- Ethernet
1 10/100 Mbps RJ45 port
Protection
1.5 kV magnetic isolation
Protocols
Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, HTTP
Serial
- Interface
1 RS-485-2w terminal block port
Parity
None
Data Bits
8
Stop Bits
1
Flow Control
None
Baudrate
1200 to 115200 bps
Protocols
Modbus RTU (slave)
Inputs and Outputs
- Configurable DIOs (by software)
12 channels
Analog Inputs
5 channels
RTDs
3 channels
Isolation
3k VDC or 2k Vrms
Digital Input
- Sensor Type
- On: short to GND
- Off: open
- On: 0 to 3 VDC
- Off: 10 to 30 VDC
Wet Contact (NPN or PNP), Dry Contact
I/O Mode
DI or Event Counter
Dry Contact
Wet Contact (DI to GND)
Common Type
12 points per COM
Counter Frequency
250 Hz
Digital Filtering Time Interval
Software Configurable
Digital Output
- Type
Sink
I/O Mode
DO or Pulse Output
Pulse Output Frequency
500 Hz
Over-Voltage Protection
45 VDC
Over-Current Protection
2.6 A (4 channels @ 650 mA)
Over-Temperature Shutdown
175°C (typical), 150°C (min.)
Current Rating
200 mA per channe
Analog Input
- Type
- ±0.1% FSR @ 25°C
- ±1.0% FSR @ -40 and 75°C
- All channels: 12 samples/sec
- Per channel: 2.4 samples/sec
Differential input
Resolution
16 bits
I/O Mode
Voltage / Current (software selectable)
Input Range
0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection)
Accuracy
Sampling Rate
Input Impedance
10 mega-ohms (min.)
Built-in Resistor for Current Input
120 ohms
RTD
- Sensor Type
- All channels: 12 samples/sec
- Per channel: 4 samples/sec
- ±0.1% FSR @ 25°C
- ±1.0% FSR @ -40 and 75°C
PT100 (-200 to 850°C)
Input connection
2- or 3-wire
Sampling Rate
Resolution
16 bits
Accuracy
Input Impedance
625 kilo-ohms (min.)
Power Requirements
- Input Voltage
12 to 36 VDC
Input Current
143 mA @ 24 VDC
Physical Characteristics
- Wiring
I/O cable, 14 AWG (max.)
Dimensions
115 x 79 x 40.4 mm (4.53 x 3.11 x 1.59 in)
Weight
Under 250 g (0.55 lb)
Mounting
DIN-rail or wall
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-6
Altitude
Up to 2000 m
Please contact us if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
- Safety
UL 508
EMC
EN 55022/24
EMI
CISPR 22, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Green Product
RoHS, CRoHS, WEEE
Please check Moxa’s website for the most up-to-date certification status.
MTBF (mean time between failures)
- Time
367,508 hrs
Standard
Telcordia SR332
Ordering Information
Available Module | |
ioLogik E1261W-T | Ethernet remote I/O with 12 DIOs, 5 AIs, 3 RTDs, -40 to 75°C operating temperature |
Customers who viewed this item also viewed