MOXA NPort 5200A Series

SPHINX in Europe
DE
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Product groups > Device Server > MOXA NPort 5200A Series

MOXA NPort 5200A Series

2-port RS-232/422/485 serial device servers

MOXA NPort 5200A Series
2861_12227.png
2861_8658.png
2861_8659.png
2861_8660.png
  • PropertiesProperties
  • DescriptionDescription
  • Further InformationFurther Information
  • PDFPDF
  • World’s lowest power consumption
  • Speedy 3-step web-based configuration
  • Surge protection for serial, Ethernet, and power lines
  • COM port grouping and UDP multicast applications
  • Screw connectors for secure installation
  • Dual DC power inputs with power jack and terminal block
  • Versatile TCP and UDP operation modes
The NPort® 5200A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5200A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.

A Greener Serial-to-Ethernet Solution

The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. The NPort® 5200A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.

Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort® 5200A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-step Web-based Configuration
The NPort® 5200A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort® 5200A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort.

COM Port Grouping
The NPort® 5200A’s COM Grouping function allows you to create a COM Group and redirect data from it to several physical COM ports on NPort device servers. With COM Grouping, you will be able to control multiple physical serial ports simultaneously by operating only one COM port.

ProdGrafik

Ethernet Interface

Number of Ports
1

Speed
10/100 Mbps, auto MDI/MDIX

Connector
8-pin RJ45

Magnetic Isolation Protection
1.5 kV built-in

Ethernet Line Protection
EN 61000-4-5 (Surge) Level 2


Serial Interface

Number of Ports
2

Serial Standards
NPort 5210A: RS-232
NPort 5230A: RS-422/485
NPort 5250A: RS-232/422/485

Connector
NPort 5210A/5250A: DB9 male
NPort 5230A: Terminal Block (5 pins per port)

Serial Line Protection
15 kV ESD protection for all signals, EN 61000-4-5 (Surge) Level 1

RS-485 Data Direction Control
ADDC® (automatic data direction control)

Pull High/Low Resistor for RS-485
1 kÙ, 150 kÙ


Serial Communication Parameters

Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Parity
None, Even, Odd, Space, Mark

Flow Control
RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF

Baudrate
50 bps to 921.6 kbps


Serial Signals

RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422
Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w
Data+, Data-, GND


Software

Network Protocols
ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2

Configuration Options
Web Console (with new Quick Setup), Serial Console (NPort 5210A/5250A only), Telnet Console, Windows Utility

Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

Linux Real TTY Drivers
Linux 2.4.x, 2.6.x, 3.x


Physical Characteristics

Housing
Metal

Weight
340 g

Dimensions
Without ears: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)


Environmental Limits

Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
-40 to 75°C (-40 to 167°F)

Ambient Relative Humidity
5 to 95% (non-condensing)


Power Requirements

Input Voltage
12 to 48 VDC

Power Consumption
119 mA @ 12V, 65 mA @ 24V


Standards and Certifications

Safety
UL 60950-1, EN 60950-1

EMC
CE, FCC

EMI
EN 55022 Class A, FCC Part 15 Subpart B Class A

EMS
EN 55024

Power Line Protection
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 3


Reliability

Automatic Reboot Trigger
Built-in WDT (watchdog timer)

MTBF (mean time between failures)
847,750 hrs


Ordering Information

Product Description
NPort® 5210A: 2-port RS-232 device server,
0 to 60°C operating temperature
NPort® 5230A: 2-port RS-422/485 device server,
0 to 60°C operating temperature
NPort® 5250A: 2-port RS-232/422/485 device server,
0 to 60°C operating temperature
NPort® 5210A-T: 2-port RS-232 device server,
-40 to 75°C operating temperature
NPort® 5230A-T: 2-port RS-422/485 device server,
-40 to 75°C operating temperature
NPort® 5250A-T: 2-port RS-232/422/485 device server,
-40 to 75°C operating temperature


Optional Accessories

(can be purchased separately)

DK-35A: Mounting Kit for 35-mm DIN-Rail
Customers who viewed this item also viewed
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.