LEGRAND KEOR LP

SPHINX in Europe
DE
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Product groups > USV (UPS) > LEGRAND KEOR LP

LEGRAND KEOR LP

Single-phase UPS from 1 to 3 kVA

LEGRAND KEOR LP
5954_18660.png
5954_18661.jpg
5954_18662.jpg
5954_18663.jpg
5954_18664.png
  • PropertiesProperties
  • DescriptionDescription
  • Further InformationFurther Information
  • PDFPDF
  • Conventional single-phase UPS systems, available in 3 versions depending on the power
  • Power from 1 to 3 kVA
  • VFI-SS-111 on-line double conversion
  • RS232 communication port
  • LAN / SNMP connectivity
  • Uptime can be extended with additional battery cabinets
  • Compact design and low footprint

Keor LP UPS is a single phase uninterruptible power supply with high frequency PWM technology, On Line Double Conversion type.

It delivers a rated power of 1000-2000-3000VA, equipped with valve-regulated hermetic-type batteries, contained inside the UPS in a specific compartment or in one or more external cabinets. Keor LP is available with different types of output sockets.
ProdGrafik

Characteristics

General characteristics 3 101 54
3 101 55
3 101 56
3 101 57
3 101 58
3 101 59
Nominal power (VA) 1000 2000 3000
Active power (W) 900 1800 2700
Technology On‑line double conversion VFI‑SS‑111
Waveform Sinusoidal
Architecture UPS with extendable backup time
Input characteristics
Input voltage 230 V
Input frequency 45‑65 Hz ±2 % Autosensing
Input voltage range 210 V÷240 Vac at 100% load
Input power factor › 0,99
Output characteristics
Output voltage 230 V ± 1 %
Efficiency Up to 90 %
Output frequency (nominal) 50/60 Hz synchronised
Peak factor 3 : 1
THD of output voltage <3% with linear load
Permitted overload:
‑ ONLINE mode
‑ 10 sec.
‑ 30 sec.
‑ instant transfer to bypass

<105%
121÷15 0 %
106÷120%
>151%
Bypass Automatic, internal, synchronised, electromechanical (for overloads and operating problems)
Batteries
Backup time extension
Battery voltage 24 Vdc 48 Vdc 72 Vdc
Backup time (min) 5
Communication and management
Screen and signalling Multi‑coloured LED status indicator,
alarms and audible signalling
Communication ports 1 RS232 serial port, 1 slot for network interface connection (ex. CS121)
Emergency Power Off (EPO) Yes
Remote control Software can be downloaded free of charge
Mechanical characteristics
Dimensions (H x W x D) (mm) 236 x 144 x 367 322 x 151 x 444 322 x 189 x 444
Dimensions of battery cabinet (H x W x D) (mm) 322 x 151 x 444 322 x 151 x 444 322 x 151 x 444
Battery cabinet Net weight (kg) 31 31 31
Ambient conditions
Ambient operating temperature (°C) 0÷40
Relative humidity (%) 20÷80 non condensing
Noise at 1 m (dBA) ‹ 50
Certifications
Reference product standards EN 62040‑1, EN 62040‑2





ORDERING INFORMATIONS


Avaibles Modules
UPS WITH IEC SOCKETS
Cat. No. Nominal power (VA) Active power (W) Back-up time (min) No. of sockets IEC WEIGHT (kg)
3 101 54 1000 900 5 3 10
3 101 56 2000 1800 5 6 17
3 101 58 3000 2700 5 6 23




Avaibles Modules
UPS WITH FRENCH STANDARD SOCKETS
Cat. No. Nominal power (VA) Active power (W) Back-up time (min) No. of sockets IEC NO. OF
FRENCH
SOCKET
WEIGHT (kg)
3 101 55 1000 900 5 3 1 10
3 101 57 2000 1800 5 6 2 17
3 101 59 3000 2700 5 6 2 23




Customers who viewed this item also viewed
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.