Advantech PCIE-1230L
Basic 64-Ais EtherCAT PCIE Master Card
Properties
Description
Further Information
Similar products
Print this page
Request Price
show my notes
PDF
Properties
Description
Further Information
PDF
- 667MHz dual-core ARM processor
- 2 x EtherCAT ports for high-performance of Motion and I/O applications
- Supports common motion SDK for rapid application development
- Up to 64 axes support for motion control
- Supports point to point move
- Supports 2 axis Linear interpolation
- Supports programmable acceleration/deceleration rate
- Programmable interrupt
- RDY dedicated input channels & SVON/ERC dedicated output channels are switchable for general input and output purposes
- Diagnostics for fast error handling can trace command and error message
The PCIE-1203L is a 2-port EtherCAT PCI Express Card. It is a ready-to-use
EtherCAT development platform for all PC-based industrial automation. The
EtherCAT protocol stack is executed autonomously on the card. It allows
the host to hadel up to two EtherCAT networks with extremely short cycle
time for Motion and pure I/O applictions. For EtherCAT motion port,
communication cycle times it up to 250us and for fast I/O ports the cycle
time is no more than 200us in a high speed I/O system. Real-time and high
precision capability are features of PCIE-1203. In addition all Advantech
motion controllers use the "Common Motion API" architecture which is a unified
user programming interface and graphical utility. This architecture saves
application maintenance and upgrades. Programmers can benfit from using
any Advantech SoftMotion Controller wihtout changing large amounts of the
application code. User-friendly examples decrease programming load, helping
users complete configuration and diagnosis easily.
EtherCAT development platform for all PC-based industrial automation. The
EtherCAT protocol stack is executed autonomously on the card. It allows
the host to hadel up to two EtherCAT networks with extremely short cycle
time for Motion and pure I/O applictions. For EtherCAT motion port,
communication cycle times it up to 250us and for fast I/O ports the cycle
time is no more than 200us in a high speed I/O system. Real-time and high
precision capability are features of PCIE-1203. In addition all Advantech
motion controllers use the "Common Motion API" architecture which is a unified
user programming interface and graphical utility. This architecture saves
application maintenance and upgrades. Programmers can benfit from using
any Advantech SoftMotion Controller wihtout changing large amounts of the
application code. User-friendly examples decrease programming load, helping
users complete configuration and diagnosis easily.
Specifications
EtherCAT
General
Ordering Information
EtherCAT
| Number of Rings | 2 (Motion x 1, I/O x1) |
| Cable Type | CAT5 UTP/STP Ethernet cable and above |
| Cycle Time | Motion: up to 250us I/O:200 us |
| Communication Motion Slave | 64 Servo Drive Max.(eq. Panasonic A5B) |
| Communication IO Slave | 1024-CH DI and 1024-CH DO |
General
| Bus Type | PCI Express |
| Certification | CE, FCC Class A |
| Connectors | 2 x RJ45 |
| Dimensions (LxH) | 175x100mm (6,9"x3,9" |
| Power Consumption | 5V DC @ 0,5A typical |
| Humidity | 5 ~ 95%RH, non-condensing (IEC 600068-2-3) |
| Operating Temperature | 0 ~ 60°C (32 ~ 140°F) |
| Storage Temperature | -20 ~ 85°C (-4 ~ 185°F) |
Ordering Information
| PCIE-1203L-64AE | Basic 64-Axis EtherCAT PCIE Master Card |
Customers who viewed this item also viewed