AKCP Programmable Sensor LCD Display (LCD-Txx)

The AKCP Programmable Sensor Display plugs into any sensorProbe+ (SP2+, SPX+) base unit and can be programmed to display the data from any AKCP Intelligent or virtual sensor. Mount a single display on the end of an aisle for data center monitoring, or warehouse monitoring. Place on the door of every cabinet, or the wall of the room. LED indicators alert if a sensor is in critical condition, as well as the on-screen display of the critical or warning status.

Specifications

Temperature


Measurement Range
-40°C to +75°C
-40°F to +167°F

Measurement Resolution
0.1°C increments
0.2°F increments

Measurement Accuracy
Maximum ±0.3 at -40ºC, minimum ±0.3 at +25ºC and ±0.3 at +75ºC
Maximum ±0.6 at -40ºF, minimum ±0.6 at +25ºC and ±0.6 at +167ºF



DISPLAY


LCD Display data
Continuous embedded temperature display
Display up to 8 sensors in standard rotation list, configured via SP+ web interface with preview.
Display sensor status, Warning or Critical
Display sensor units: °C, °F, %rh, %, V, (m)A, (k)W, (k)Wh
Display unit?s IP address when plugged in
Display swing handle lock status: Open, Closed
Blue backlight

LCD size
88.95 x 53.42 mm

LED Indicator
2 global status LEDs : Warning and Critical status



Interface


Communications cable
RJ-45 jack to sensor using UTP CAT5e/6 cable

Power source
Powered by the sensorProbe+ familiy units. No additional power needed

Power Consumption
Typical 220 mWatt, 40 mA

Maximum Cable Length
Run length is 30 feet (10 meters) with approved low capacitance shielded cable or UTP

Dimensions
169.67 x 97.1 x 31.18 mm

Mounting
Keyhole mounting

Important Note

• The Programmable LCD Sensor Display is only compatible with the sensorProbe+ platform units.
• When plugging the first time or after upgrading a sensorProbe+ unit, the sensor firmware might be upgraded by the unit and not be available right away.
• On the sensorProbeX+, the sensor firmware can be upgraded only on the main module sensor ports

Sensor count
1

Ordering Information

Product Model	Order Number	Description
Programmable LCD Display
LCD-TMP	949025	Programmable LCD Sensor Display with built in temperature sensor
LCD-THS	944167	Programmable LCD Sensor Display with built in temp & hum sensor
CTM45	944168	Cabinet 45° top mount for LCD Display
CRM	944169	Cabinet 0U Rear Mount for LCD Display