AKCP SensorProbe1+ (SP1+)

The sensorProbe1+ (SP1+) is a compact device. Equipped with a dry contact I/O, an intelligent sensor port and a built in temperature sensor on 5ft cable. It runs the same user itnerface as the rest of the sensorProbe+ product line, with all the same features such as IPV6, SNMPV3, Radius, TACACS, Modbus TCP/IP, and up to 80 virtual sensors.

Connect the sensor splitter box with cabinet thermal maps and contactless current meter, and you havea complete monitoring solution for your rack.Monitor temperature front and rear, top middle and bottom. Check your ?T, humidity, current consumption. Utilize the dry contact for door contacts, and virtual sensors to monitor third aprty devices installed in the rack.

With PoE built in as standard, the additional 5VDC USB power input can be used as the primary source of power with PoE as backup power.

SP1+ can be powered with dual inputs. PoE comes as standard, and an additional AC or DC source can provide primary power with PoE providing backup power. Or, in the absence of PoE dual inputs are available through our external DC-DC conversion box.

Specification

Dimension
Size 82 x 72 x 35 mm
Weight 0.2 Kg

Network Interface
Standard 10/100 Mbps Full Dunplex
Ethernet RJ-45 Port

Mounting
Screw mounting
Built in DIN Rail Clip and cable tie loops

Power Requirements
PoE IEEE 802.3af support
Optional external 5.5V 3A Power Adapter Input Voltage and Current ratings : 100V~240V ? 0.22A
Optional external 12-24 or 40-60 VDV dual inputs

Status Indication
LED indication for Power
LED for network connectivity
LED for sensor online and threshold status
LED for dry contact input status

RJ-45
1 RJ-45 Sensor Ports for connecting AKCP Autosense Sensors

Componenets
Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.

Operating Environment
Temperature : Min. -35° C ? Max. 80° C
Humidity: Min. 20% ? Max. 80% (Non-Condensing)

MTBF
1,400,000 Hours based on field experience with sensorProbe units.

Inputs
4x Sensor Ports module
1x RJ45 Sensor Port
1x Dry Contact I/O (0/5VDC)
1x 10/100 Ethernet Port
1x hard wired 5ft temperature sensor
5x free virtual sensors (additional unlocked via license)

Outputs
Configurable output signals (0VDC/5VDC) on any of the 4 RJ-45 sensor ports

Max Sensors
Maximum of 400 online sensors, including virtual sensors.

Maximum Number of Access Control Users
500 Users
100 Users default

Supported Protocols
Rsyslog
MQTT / MQTTS
SNMP V1/2
IPV6
RADIUS
TACACS
HTTPS
Encrypted E-mail

Licensing

5 Dry Contact : DC5
5 dry contact input sensor (per port) 1 License equal 1 RJ45 port unlocked

Virtual Private Network (VPN) : VP
VPN ? Connect to AKCPro Server from your base unit through VPN over Ethernet or cellular network.

Virtual Sensor pack : VS
Virtual sensor (pack of 5 sensors). Maximum of 80 virtual sensors. * **
Every SP2+ comes with 5 free virtual sensors

500 Access Control user database : UA
500 users for access control (SP+ series has 100 users as standard)

IPV6 : SP-IPV6
Support for IPV6 network addresses

Radius : RAD
Radius user authentication server connection. TACACS authentication to Radius

The below table shows the features included with the SP1+ Basic, and the benefits of upgrading to the Professional license.

SP1+	SP1+B	SP1+PRO
5 dry contact	-	-
Virtual Sensors	-	5
Event Log	yes	yes
Notifications	yes	yes
MQTTS	yes	yes
Graphs	yes	yes
Maps	-	yes
3rd Party Modbus	-	yes
IPv6	-	yes
SNMPV3	-	yes
VPN	-	yes
Access Control User	-	yes
RADIUS	-	yes
Heartbeats	-	yes
Modbus	-	yes
Cloud	-	yes
Authentication	-	yes

Ordering Information

Product Model	Order Number	Description
sensorProbe 1+Basic
SP1+B-PoE	949000	sensorProbe1+ Basic PoE with fixed 5ft temp sensor (No PSU included), software features are not unlocked.
SP1+B-PoE-THS	949001	sensorProbe1+ PoE Basic with fixed 5ft temp and humidity sensor (No PSU included),       software features are not unlocked.
SP1+PRO-L	944129	License to upgrade SP1+ Basic to Professional
sensorProbe1+Professional
SP1+PRO	944130	sensorProbe1+ Pro with fixed 5ft temp sensor, all software features are unlocked.
SP1+PRO-PoE	944101	sensorProbe1+ Pro PoE with fixed 5ft temp sensor (No PSU included), all software features are unlocked.
SP1+PRO-THS	944131	sensorProbe1+ Pro with fixed 5ft temp and humidity sensor, all software features are unlocked.
SP1+PRO-PoE-THS	944109	sensorProbe1+ Pro PoE with fixed 5ft temp and humidity sensor (No PSU included),     all software features are unlocked.

Product Model	Order Number	Description
Accessories for SP1+ and SP2+
E-M4G	949004	"External UART Modem 4G external Modem (Global band) includes : 3m External Antenna Compatible with SMS Notifications and data (with voice call support) (only for SP1+P, SP2+P, SPX+, SPXN)"
M4E	940148	"4G Internal Modem (EUR band) includes : 3m External Antenna Compatible with SMS Notifications and data (no voice call support) (only for the SP2+Professional)"
M4G	944104	"4G Internal Modem (Global band) includes : 3m External Antenna Compatible with SMS Notifications and data (with voice call support) (only for the SP2+Professional)"
5AVAC3USB	949028	5.5VDC 3A PSU with IEC inlet and USB adapter
5AVAC3	949027	5V 3A Power supply with IEC connector for SP2+, SPX+, SEC+ and SP2/SP4/SP8 5V version
VS	940172	"Virtual sensors (pack of 5 sensors). Max of 80 virtual sensors. (only for SP1+P, SP2+P, SPX+, 5 virtual sensors are included with delivery SP1+ and SP2+,     10 virtual sensors are included with delivery SPX+)"
5DCS	949018	"5 Dry Contact Input Sensor (DCS licence is required)"
DCS	940145	5 dry contact license for SP2+ (per port)

• AKCP SensorProbe1+ (SP1+) Datasheet (382.0 kB)