Barix R6

SPHINX in Europe
DE
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Product groups > Gateways > Barix R6

Barix R6

Modbus remote I/O module with serial RS-485 Modbus/RTU interface, and 6 high current relays (230VAC,16A)

Barix R6
939_16179.png
939_1075.jpg
939_33994.jpg
939_33995.jpg
939_33996.jpg
  • PropertiesProperties
  • DescriptionDescription
  • Further InformationFurther Information
  • PDFPDF
  • 6 relays (250 VAC 16 Amps,NO &NC)
  • RS-485 serial interface
  • Protocol:Modbus/RTU
  • Two Barionet module connectors for additional relay extensions, I/O devices, power modules, temperature sensors etc.
  • DIN-rail mountable

R6 is a DIN-rail mountable relay module for commercial control,power switching and home automation applications. Using the industry standard Modbus protocol over 2-wire RS-485 the device can be controlled from any Modbus capable master. Six independent relays allow the use of the Barix R6 in a wide range of switching applications:

  • Switching power (lights,blinds,heating,power relays,motors)
  • Activate bells,door strikes,indicators and alarms

Each relay has three connections (common,normally closed and normally open)available at screw blocks supporting wires from AWG26 /0.15mm 2 up to AWG14 /2.5mm 2 . To connect to other Barix Barionet devices the Barix R6 features two Barionet module connectors on both sides of the device carrying power and RS-485 signals (one bus cable included). Barix R6 supports Modbus/RTU protocol at speeds of 9 ’600 and 19 ’200 Bauds,with and without parity.

Up to 31 Barix extension modules can be directly connected to a Modbus Master such as the Barix Barionet and can be increased to up to 250 devices using standard RS-485 repeaters. Using the Barix Barionet, the Barix R6 can be controlled by a local Basic application (BCL) as well as remotely using TCP, UDP, Modbus/TCP and SNMP.

Barix R6 is an inexpensive solution to add high power switching capabilities to Modbus systems.

A mounting bracket is available as an accessory.

ProdGrafik

Relays
  • 6 relays (250 VAC 10 A, 16 Amax <1sec) on screw block with common, NO (normally open) and NC (normally closed) contacts
  • for wires AWG 26 – AWG 14 / 0.15 – 2.5 mm²

    RS-485 / Power / Expansion
  • Power/RS-485 on detachable screw block for wires AWG 28 – AWG 16 / 0.08 – 1.3 mm²
  • 2 extension connectors (3"/75 mm cable incl.)

    RS-485 / Protocol
  • RS-485 (2-wire), 9´600/19´200 Baud, 8 bit, Even/No parity software configurable,
  • Modbus/RTU protocol

    Misc
  • 1 LED for power indication
  • 1 LED for RS-485 active send indication
  • 6 LED for relay status indication
  • Internal connector for default settings jumper

    Power supply requirements
  • 12 to 24 VAC / 9 to 30 VDC
  • 3.5 Watt max. (all relays active)

    Case
  • high quality plastic, 220 grams, DIN-rail mount.
  • 4.13" x 3.34" x 2.83"/105 mm x 85 mm x 32 mm

    MTBF
  • Min. 237 000h acc. to MIL217F at 25°C ambient temperature

  • Customers who viewed this item also viewed
    Accept all Reject Configure

    This website uses cookies to provide the best possible experience. More information.